If you select No, you will be guided through the calibration process again to refine it.If you are happy with the cut, select Yes, then Continue to proceed to the final calibration screen.When it is done, unload the mat, remove the calibration sheet and respond to the final question in Design Space. The machine will then perform a confirmation cut around the large rectangle on the sheet.Select the Top then Right dropdowns to indicate the line number or letter with cuts closest to the center of the line. Design Space will ask you to select which number and letter cuts are closest to the center of the printed lines. Some will not touch the printed lines, and others will. Once done, and without unloading the mat, look closely at the lines along the top and side of the page. The machine will begin the calibration cuts along the top and side of the page.Once that is complete, you will be guided through the calibration once more to fine-tune it. Note: If you select No, Design Space will proceed to the next step in an effort to get the cut closer to the line. If it does, select Yes in Design Space, then Continue to proceed to the next step. Without unloading the mat, look at the cut to see if the cut touches the printed line all the way around. Once done it will cut around the small square near the center of the sheet. Your machine will begin to scan the sheet for calibration markings.On the next screen, select your machine from the drop-down menu, select the appropriate material setting, load the mat into your machine, and press the flashing Go button. Ensure that your Cricut Explore or Cricut Maker machine is powered ON and connected to your computer via USB cable or Bluetooth pairing.Place the printed calibration sheet onto your machine mat, positioning it in the top left corner of the mat.Select the printer you would like to use, then select Print.Sign in to Design Space and select the account menu (☰).

Canon printer test page pdf